ANTAC GUN ROD FELT ADAPTERS
For fitting felt swabs / pellets to gun barrel cleaning rods.
ANTAC FELT SWAB BARREL CLEANING ADAPTERS

For American standard #8-32 threaded rods.
Screw on design.
Diameter ~ 5.1mm adapter body, 5.5mm with nut.
Overall length ~ 28mm.
Weight ~ 3 gram.
£3.60p each
for 50% off of Option G or H Adapter from UK Adapters Page. Condition: New
Our AnTac felt swab adapters allow the use of AnTac and similar (VFG, etc) drilled felt cleaning pellets on most (but not all) USA threaded rifle and pistol barrel rods, and others with a suitable thread adapter.
Brass adapter with male thread rod fitting.
Designed for .22 and upwards sized barrels.
If using smaller calibre barrel felt cleaning pellets, you may need to enlarge the drilled holes, as many are pin holes designed for use with spear point jags.
With longer felt pellets, they will likely cover all the threaded end, so no space or need to fit the nut.
Also available:
US / UK Thread Adapters,
AnTac Gun Barrel Cleaning Felt Swabs,
Rifle Chamber Cog Shaped Felt Swabs.

SHOWN WITH A UK THREAD ADAPTER, FOR UK SPEC RODS (AVAILABLE SEPARATELY):



For American standard #8-32 threaded rods.
Screw on design.
Overall diameter ~ 5.0mm.
Weight ~ 4 gram.
£3.60p each
SOLD OUT
OPTION A

For European 5mm female and USA #5/40 male threaded rods.
Screw on design with end cap.
Overall diameter ~ 5.0mm.
Weight ~ 4 gram.
£4.80p each
AVAILABLE TO SPECIAL ORDER
OPTION B
The European adapter is a multi-thread, with 5mm male thread with a #5/40 female thread, the female thread should fit most .177 cal cleaning rods, but please note the adapter is too thick for .177 barrels.

USA FELT ADAPTER SHOWN WITH A UK THREAD ADAPTER, FOR UK SPEC RODS
(AVAILABLE SEPARATELY)

