Colt 1911 Wood Grips - Full Size M1911 Grip

Ant Hill > Pistol Accessories > 1911 Wooden Grips

COLT 1911 COMMANDER AND GOVERNMENT SIZE GRIPS

Wooden handle panels for 1911 pistols.

These are unique grips and may vary very slightly from the photos.

PAIR OF COLT M1911 WOODEN GRIPS

PG-01

Pair of Full Size Light Brown Rosewood Rosewood 1911 Pistol Grips with a Smooth Finish

LIGHT BROWN ROSEWOOD

£10.00p per pair
MORE SOON
Weighs approx 42 grams.

PG-10

Pair of Full Size Zambia Red Sandalwood 1911 Pistol Grips with a Smooth Finish

ZAMBIA RED SANDALWOOD

£12.00p per pair

Weighs approx 40 grams.

PG-03

Pair of Full Size Dark Brown Rosewood Wood 1911 Pistol Grips with a Smooth Finish

DARK BROWN ROSEWOOD

£12.00p per pair

Weighs approx 28 grams.

PG-08

Pair of Full Size African Black Ebony Wood 1911 Pistol Grips with a Smooth Finish

AFRICAN EBONY

£14.40p per pair

Weighs approx 44 grams.

Condition: New

Beautiful grips for a Colt 1911.

Made from wood.

Smooth finish.

Full size Government / Commander grips.

The fixing holes are 6.5mm diameter and are 78mm from centre to centre.

GENERAL INFORMATION:

They have a cutout on the back of the top left grip, for standard safety, but if you have ambi-safety (of which there are a few different designs), then you will likely need to cut out a section of the back of the grips to allow space for the ambidextrous safety.

Standard cut grips have bevelled ends (used on most guns).

Magwell cut grips have flat ends to butt-up against the standard thickness magwells for a flush finish.
There are others but those are the main two end cut types.

The end of grip cut outs are for the main spring housing pin.

The small notch on the front edge of the right side grip is for the magazine catch fitting.

Finish ~ buffed wax to beautifully highlight the texture.

We have been told that the ornate grips didn't fit the GSG 1911 rimfire or the Colt CQBP Co2 pistol,
this could also apply to the other grips.

They need a small area removing from the back of the grip to fit over the Co2 capsule on the Remington P-1911 RAC.

They should also fit Weihrauch HW45 pistols, but may need a little adaption.

Also available ~ Hand Carved 1911 Grips and Decorative 1911 Grip Screws.

LIGHT BROWN ROSEWOOD: