TRIPOD SHOOTING STICK RESTS
Rifle / airgun benchrests.
V MOUNT TRIPOD BENCHREST
This shooting rest tripod is suitable for prone shooting on the ground or for use on a table.
Provides far more height adjustment than any other compact carry benchrest tripod we have ever stocked.
The legs have an adjustable collar to allow for two angle settings.
Height settings from ground to V notch base ~ 9.5 inch or 22.75 inch.
Super convenient and lightweight to carry.
Aluminium shafts and legs with ABS plastic fittings, this shooting rest is tough enough to bare heavy loads during range shooting or hunting.
The strong rubber feet are anti-skid and perfect for most terrains.
The tripod comes with the universal 360 degree rotating V yoke shooting rest holder, which is non-slip material to increase grip to hold your barrel, forend or handguard and help protect the finish.
The V yoke is also compatible with most other threaded monopod, bipod, tripod shooting sticks or camera stick rest.
It can also be quickly converted into the monopod shooting rest by the hook and loop strap to secure it.
It can freestands in monopod setup, though less stable than in tripod mode.
Versatility of tripod also allows the removal of the V yoke to be replaced with the camera, telescope, spotting scope, binocular accessory and other shooting pads.
Portable, versatile and stable.
Benchrest tripod base shooting sticks.
Lever-locking leg sleeves to unlock and adjust the individual leg lengths.
Detachable V mount that can freely spin 360°.
Colour ~ matt black.
Minimum height from ground to base of the V notch 240mm / 9.5 inches.
Maximum height from ground to base of the V notch 580mm / 22.75 inches.
Should be suitable for supporting weight up to 5 kilos / 11 lbs.
Weighs approx ~ 450 grams.
The kit includes the tripod, V yoke rest, V yoke adapter, lock velcro strap and drawstring carry bag.
The main shaft as well as the legs have two sections, to allow for height adjustment.
The main shaft has a lever-lock to lock out the top section and a adjuster knob for the lower section.
The legs can individually be extended / retracted to allow of uneven ground, and lock with the leg lever lock.
To increase the angle of the legs, collapse the tripod and turn the collar ring clockwise, and vice-verse to reduce the angle.
The V yoke thread will also accept many cameras and smart phones with a universal photography thread fitting (1/4 inch diameter, 20 threads per inch UNC).
Then there is an adapter thread included for use with some spotting scopes and binoculars (not yet identified).
LEG ANGLE ADJUSTMENT TO INCREASE STABILITY OR A LITTLE MORE HEIGHT ADJUSTMENT:
AS WELL AS THE V YOKE, THREAD ADAPTER INCLUDED TO ALLOW FOR
CAMERA / SMART PHONE OR SPOTTING SCOPE / BINOCULARS: