TWO PIECE MATCH MOUNTS
For Hawke scopes and sights.
HAWKE TWO PIECE WEAVER MATCH MOUNTS
22112LOW PROFILE ~ 25mm
£30.00p per pair
For 1" / 25mm diameter body tube rifle scopes.
Height ~ 40mm / 1.6″.
Weight ~ 71 grams / 2.5oz.
£30.00p per pair
For 1" / 25mm diameter body tube rifle scopes.
Height ~ 40mm / 1.6″.
Weight ~ 71 grams / 2.5oz.
22113MEDIUM PROFILE ~ 25mm
£31.00p per pair
For 1" / 25mm diameter body tube rifle scopes.
Height ~ 44mm / 1.7″.
Weight ~ 82 grams / 2.9oz.
£31.00p per pair
For 1" / 25mm diameter body tube rifle scopes.
Height ~ 44mm / 1.7″.
Weight ~ 82 grams / 2.9oz.
22114HIGH PROFILE ~ 25mm
£32.00p per pair
For 1" / 25mm diameter body tube rifle scopes.
Height ~ 53mm / 2.1″.
Weight ~ 88 grams / 3.1oz.
£32.00p per pair
For 1" / 25mm diameter body tube rifle scopes.
Height ~ 53mm / 2.1″.
Weight ~ 88 grams / 3.1oz.
22115LOW PROFILE ~ 30mm
£35.00p per pair
For 1 3/16" / 30mm diameter body tube rifle scopes.
Height ~ 44mm / 1.7″.
Weight ~ 84 grams / 3.0oz.
£35.00p per pair
For 1 3/16" / 30mm diameter body tube rifle scopes.
Height ~ 44mm / 1.7″.
Weight ~ 84 grams / 3.0oz.
22116MEDIUM PROFILE ~ 30mm
£36.00p per pair
For 1 3/16" / 30mm diameter body tube rifle scopes.
Height ~ 48mm / 1.9″.
Weight ~ 82 grams / 2.9oz.
£36.00p per pair
For 1 3/16" / 30mm diameter body tube rifle scopes.
Height ~ 48mm / 1.9″.
Weight ~ 82 grams / 2.9oz.
22117HIGH PROFILE ~ 30mm
£37.00p per pair
For 1 3/16" / 30mm diameter body tube rifle scopes.
Height ~ 53mm / 2.1″.
Weight ~ 88 grams / 3.1oz.
£37.00p per pair
For 1 3/16" / 30mm diameter body tube rifle scopes.
Height ~ 53mm / 2.1″.
Weight ~ 88 grams / 3.1oz.
FLAT RATE OF £9 TRACKED DELIVERY FOR
ANY MIX OF HAWKE BRANDED PRODUCTS
FREE DELIVERY ON £300+ ORDERS
Double hex screws to hold your scope firmly in place.
Two piece design.
20mm wide Weaver / Picatinny Match mounts with crossbar for additional security.
Internal cushion tape prevents marking and damage.
High grade aluminium anodized in matte black.
Precision engineered from high grade aluminium with rounded edges prevent scope damage.
CAUTION: Ensure your gun is not loaded ant the action is open.
Always practice safe handling procedures.
- If necessary attach a base to your rifle/pistol according to the manufacturer’s instructions.
- Place the Hawke rings onto your base or rail.
Using the enclosed hex key, tighten the screws on the side clamp. - Remove the top clamps and place the scope onto the rings.
Replace the top clamps but do not tighten. - With the gun unloaded and the action open, hold the gun in a normal shooting position and move the scope forward or backward to obtain the best eye relief (3-4 inches approx).
- When correct eye relief is obtained, rotate the scope until the reticle is vertically aligned with the gun.
- Alternately tighten the screws that hold the top clamps to the rings.
Do not over tighten.
16 in/lbs (1.33 ft/lbs, 1/8 Nm) for the top screws and 30 in/lbs (2.5 ft/lbs, 3.4Nm) for the side clamp screws. - Your gun and scope are now ready to be zeroed.
Also available ~ SportsMatch Two Piece Dovetail Rail Scope Mounts.
You may also be interested in...
≡
Top