BORESNAKE SIZE GUIDE

Hoppes's BoreSnakes
The fastest three-step bore cleaner.
One pull-through will loosen large particles with the surface area, then scrub out tough residue with the embedded bronze brush* and then clean the bore spotless with a surface area 160 times larger than a standard patch.
Add a few drops of Hoppe's No.9 lubricating oil or Hoppe's Elite and your gun is ready for to lock away.
The BoreSnake is machine washable, although a bucket of soapy water is probably preferable.
We recommend fitting an auxiliary cord to the loop end of the BoreSnake, as it can be a tight fit for the first few uses.
The fluffy floss end is only found on the shotgun sizes.
*The bronze brush is not on the .177 airgun size, so not to damage the guns breach seal.
RIFLES | SHOTGUNS | PISTOLS AND REVOLVERS | GAS GUNS | ||||
---|---|---|---|---|---|---|---|
24009 | .177 Airgun (no brush) | 24031 | .410 gauge | 24000 | .22 caliber | 24040 | 37mm, 40mm gas guns |
24010 | .17 cal. Centerfire & .17HMR | 24032 | 28 gauge | 24001 | .30, .32 caliber | ||
24011 | .22 cal. Centerfire & Rimfire | 24033 | 20 gauge | 24002 | .357, .38, 9mm caliber | ||
24012 | 6mm, .240, .243, .244 caliber | 24034 | 16 gauge | 24003 | .40, .41 caliber | ||
24013 | .25, 6.5mm, .264 caliber | 24035 | 12 gauge | 24004 | .44, .45 caliber | ||
24014 | .270, 7mm, .284, .280 caliber | 24036 | 10 gauge | ||||
24015 | 7.62mm, .308, 30-30, .30-06, .300, .303 caliber | ||||||
24016 | .32, 8mm caliber | ||||||
24017 | .338, .340 caliber | ||||||
24018 | .35, .350, .357, .358, .375 caliber | ||||||
24019 | .416, .44, .45-70, .458, .460 caliber | ||||||
24020 | .50, .54 caliber | ||||||
24025 | .204 caliber | ||||||
24026 | |||||||
24037 |
≡
Top