ANT SUPPLIES LTD
Free postage and packaging, UK mainland.
RUGER BARREL THREAD ADAPTERS
For 10/22 rifle silencer / moderator / muzzle brake fitting.
SLIP-ON RUGER 10/22 THREAD ADAPTER
1077 ~ 1/2-20 + GUARD£20.00p each
BY SPECIAL REQUEST
Each weighs 34 grams.
.223 CAL ~ 1/2-20 + GUARD£20.00p each
BY SPECIAL REQUEST
Each weighs 36 grams.
.223 CAL ~ 1/2-28£10.80p each
£7.20p each
SOLD OUT
Each weighs 28 grams.
.308 CAL ~ 5/8-24£12.00p each
£7.20p each
Each weighs 23 grams.
Barrel thread adapter for Ruger 10/22 rifles.
Choice of 1/2" ~ 28 TPI or 5/8" ~ 24 TPI American thread adapter.
Allows the fitting of most end of barrel accessories.
Secures with three grub screws, allen key included.
Made from aluminium.
The slot to allow for the front sight is 18.06mm long by 8.96mm wide.
Fits 15.9mm diameter barrels.
Overall length ~ 41mm.
For muzzle brake, flash hiders, compensator, etc.
No machining required, these adapters simply attach to the factory finished plain muzzle.
Convert your non threaded Ruger 10/22 barrel for all your end of barrel accessories.
The 1/2" ~ 28 TPI should fit all Ruger 10/22 Carbine, Compact, Sporter, Takedown .22 calibre rifles, with standard factory muzzle front sight bands.
Please Note: these are designed for the Ruger 10/22 firearm, and we do not know if compatible with any airgun models.
The Umarex Ruger 10/22 .177 air rifle barrel is approx 4mm in
diameter to large (19.9mm?) to be able to accept these adapters.
We can supply a similar adapter for Crosman 10/77 (1077), 2100 and 2200 air rifles (16mm +/- 0.1mm) for either 1/2″x20 UNF or 1/2″x28 UNEF threads.
Please Note: Thread protectors also available but not included (except with the 1/2-20 options).
SPECIAL OFFER:
Need a thread protector at the same time?
Use Promo Code ~ SATGAddon ~ for 50% off:
Thread protectors page link ~ HERE
.223 CAL ~ 1/2-28 ADAPTER WITH GUARD£10.20p each
Each weighs 38 grams.
.308 CAL ~ 5/8-24 ADAPTER WITH GUARD£10.20p each
Each weighs 58 grams.
Also available ~ Ruger 10/22 Sight Rails and Rifle Muzzle Thread Guards.
Please Note: Thread protectors also available but not included.
THREAD TYPE OPTIONS:
By special request we can also supply a 1/2″x20 UNF version:
Please Note: The above are unlikely to fit air gun versions, as they are not made to the same dimensions, although they may fit with adaptions.
There is a Crosman 10/77 adapter available to special order for the 1077, 2100 and 2200
(to 1/2x20 or 1/2x28) with 16mm +/- 0.1mm barrel diameter.
Please note however that Crosman 1077 barrels can vary in the outer diameter for about 0.1mm from model to model:
